CN EN
 
 
Metal heater
Quartz heater
Teflon (TEFLON) electric heater
Heater and the general failure to exclude
Heater temperature flu in the first and over-temperature protection
Fluorine plastic, titanium, stainless steel heat exchanger Preparation
Blue and titanium anodes
A variety of titanium oxide of aluminum rack, fixture and standard titanium
BAODA and use a variety of titanium anodes
Pure titanium corrosion resistance
Liquid heater information look-up table
 
 
Products No.:
 
HomeProductsMetal heater  
 
Product Name: Single metal tube heater

Single-tube metal heater

功率

电压

发热长度

总长度

304不锈钢

316不锈钢

重量

WATTS

VOLTS      See pg.1

HOTZONE   In/(MM)

OVERALL LENGTH In/(MM)

304 SS

316 SS

TITANIUM

SHIPWGT Lbs/(kg)

1000

120

6

11

F1111-** 

S1111-**

T1111-**

7

 

240

155

280

F1211-**

S1211-**

T1211-**

3.5

2000

120

10

17

F2117-**

S2117-**

T2117-**

10

 

240

225

430

F2217-**

S2217-**

T2217-**

4.5

 

480

 

 

F2417-**

S2417-**

T2417-**

 

3000

240

16

23

F3223-**

S3223-**

T3223-**

11

 

480

405

585

F3423-**

S3423-**

T3423-**

5

4000

240

20

29

F4229-**

S4229-**

T4229-**

13

 

480

510

735

F4429-**

S4429-**

T4429-**

6

5000

240

25

35

F5235-**

S5235-**

T5235-**

15

 

480

635

890

F5435-**

S5435-**

T5435-**

7

6000

240

30

40

F6240-**

S6240-**

T6240-**

17

 

480

760

1015

F6440-**

S6440-**

T6440-**

8

8000

240

37

47

F8247-**

S8247-**

T8247-**

23

 

480

940

1195

F8447-**

S8447-**

T8447-**

10.5

9000

240

44

54

F9254-**

S9254-**

T9254-**

24

 

480

1120

1370

F9454-**

S9454-**

T9454-**

11

10000

240

49

59

F10259-**

S10259-**

T10259-**

25

 

480

1245

1500

F10459-**

S10459-**

T10459-**

11.5

12000

240

58

68

F12268-**

S12268-**

T12268-**

28

 

480

1475

1730

F12468-**

S12468-**

T12468-**

13

 Three-phase type also available , please add "-3" when choose the over-temperature protection device models.


Product Features

1.Adopt titanium, zirconium, SUS304 and SUS316 stainless steel to make, divide into vertical and heated at the bottom of "L", "Z" shape.
2.According to the installation location , the chemical liquid’s nature, solid matter deposit characteristics in liquid to design the surface power of heat tube and decide the Tube diameter. Diameter general specifications: ø11mm,ø17mm,ø25mm,ø30mm,ø32mm,ø45mm,ø50mm。
3.ø11mm, ø17mm tubes are shrinking tube heater, liquid heating, heat pipe surface power 5.6W/Cm2, apply to the mobility, and less solid Body deposition, Liquid does not precipitate in the heating surface of the liquid crystal heating after cooling.
4.ø45mm diameter series products adopt low surface power design.
5. Have 120V single-phase voltage, 220V, 380V, 220V three-phase, 380V three-phase, power from 0.5KW to 140KW.
6. All heaters can be ancillary use with over-temperature protection switches and temperature probe.
7. All heaters are adopt international inspection standards and ensure the electrical safety.


WARRANTY: All BAODA equipment heaters and control components have been carefully inspected before shipping and warranted to be free defects in workmanship and material for a period of one year from date of purchase on a prorated basis. At its option, BAODA will repair or replace any defects which are exhibited under proper and normal use. BAODA disclaims any responsibility for misuse, misapplication, negligence or improper installation of equipment. Process Technology makes no warranty or representation regarding the fitness for use or the application of its products by the purchaser.
 
Any damage under normal and proper use, both to provide free mainrenance service. However, it is not under the guarantee when it causes any damage by improper use, misuse, installation errors of its users, as follows:
  • Excessively high solution temperatures
  • The presence of inhibitors
  • The concentration of the solution
  • Stagnant or turbulent flow of the solution
  • Use banned drugs
  • Aeration
  • The presence of other acids causing a secondary reaction
  • Presence of oxygen or an oxidizing agent in the solution
  • Grounded wrongly
  • Erosion
  • Flux floating on the surface
  • The man-made scratches on teflon surface makes the electric heater can not work normally.
  • The presence of undissolved gases
  • Under normal working hours, the heater leaving the solution or the solution lower than the heat zone and cause drying out.
BAODA is not liable for costs incurred in removal, reinstallation, or unauthorized repair of the product, or for damage of any type whatsoever including incidental or consequential damage.

NOTE: All BAODA products are enclosed product descriptions. Please refer to insert and choose the appropriate electric heater and welcome contact us for any questions about our products.
 
Clicks: 1185
 
copyright: Guangzhou Baoda Electrothermal Titanium Product Co., Ltd. ICP 05005925